Loftness Skid Steer Flail Mower

Overview
Overview

Hydraulic Speed and Power for a Clean Cut.

Loftness designed the hydraulic-driven flail mower to take advantage of the power and versatility of skid steers. Easy to operate and maintain, the Loftness skid steer mounted flail mower is packed with high-performance features that power through the toughest grasses, weeds and brush up to 3/4 inches in diameter.

  Balanced Rotor

Computer Balanced:

Using the latest computer balancing technology, every rotor is balanced at high speeds before assembly. Then, Loftness goes the extra step to ensure peak performance by running a full operational speed test after assembly.

 

Specifications
Model
Skid Steer Flail Mower
Year
2021
Sale Type
New
Manufacturer
Loftness
Quantity
0
Manufacturer Qty
0
features
  Features

 

  • Universal skid-steer mount
  • 10 gauge (3.4 mm) steel body
  • Curved hood for improved suction
  • 1 3/4 inch (4.5 cm) rotor bearings
  • Bearing deflector guard
  • 1/4 inch (6.4 mm) steel end plate
  • Adjustable skid shoes
  • Fine-cut, reversible knives
  • Structural steel frame
  • 0 to 4.5 inch (0-11.4 cm) cutting height
  • Steel deflector shields
  • Easy access vented belt shield
  • Support bearing
  • Directly coupled hydraulic motor
  • High pressure gear-type motor
  • No case drain needed
  • All-welded hitch
  • Rear steel deflector
  • 1 1/2 inch (3.8 cm) roller bearings
  • Full-width adjustable gauge roller
  • Roller scraper
  • Non-slip safety step
  • Taper-lock sheaves
  • Spring-loaded belt tightener
  • 3-groove banded belt

 Advantages

  • Front-mounted, skid-steer hydrostatic drive
  • Cuts brush, weeds or grass with same knives
  • Leaves an even mat of mulch for faster decomposition
  • Two sizes to choose from: 72 & 90 inch (213 & 228 cm)
  • Mowers work with as little as 10 gpm (38 lpm). Note: 20+ gpm (75+ lpm) is recommended for tall weeds and intermittent brush.
  • Tractor-mounted models also available (three-point hitch & 540 PTO required)

 

specifications
Model 72MH 90MH
Flow Requirement

26-43 GPM @ 4300 PSI or
13-26 GPM @ 3400 PSI

26-43 GPM @ 4300 PSI or
13-26 GPM @ 3400 PSI
Max Hydraulic HP Input 90 90
Width of Cut in Inches 72 90
Overall Width in Inches 84 102
Number of Knives 96 (48 sets) 120 (60 sets)
Weight in Pounds 1008 1208
Rotor Speed 1900-2200 RPM 1900-2200 RPM
Videos

Videos

Sales People
Contact Information

 Contact Information

kirchner Machine Ltd

2419-2ND, AVE. N. LETHBRIDGE, AB.
LETHBRIDGE   Alberta , T1H 0C1

403-328-5568

Location
Model
Skid Steer Flail Mower
Year
2021
Sale Type
New
Manufacturer
Loftness
Quantity
0
Manufacturer Qty
0

 Request More Info